Berrys 2016 - page 14

+44 (0) 121 558 4411
Berrys’ comprehensive range of forecourt equipment extends from pump stands, offset fill and vent frames, vapour recovery
and overfill prevention equipment to pollution control, monitoring wells, manhole covers, signs and labels.
Vapour Tite Dip Cap
Berrys has designed the
Vapour Tite Dip Cap as a
solution where sites are required
to have an automatic shut off
system underneath a manual
tank dipping point.
The Vapour Tite Dip Cap’s shape
has been designed with a dip
point position to suit the shape of
the dip stick, underneath which is
a spring loaded, lever type cap
system. When the cap is pushed downwards, it pushes
out of the way and allows the dipstick to enter the tank
easily. When the dipstick is removed, it shuts quickly,
with the Viton seal ensuring it is fully sealed. The design
means that any pressure behind the seal can’t escape into
the dip point chamber.
Steel Manhole Covers
Our range of Steel Manhole
Covers has grown over the past
few years in line with customer
requirements. We now stock
double and single seal covers
with 80mm depth. The most
popular sizes are 600mm square
and 760mm square. We also
stock 300mm square, 450mm
square, 600mm x 450mm and
600mm x 750mm.
Pump Cradles
Our in house Fabrication department allows us to
manufacture ANY cradle for ANY pump on the supply
and approval of the required Pump’s footprint. We have
manufactured cradles for all types of Pumps including
Dresser Wayne, Gilbarco,
Tokheim, Petrotec to name
a few. All can be supplied
to customers’ specifications
and can be inclusive of
brackets to accommodate
either U bolts or Shear
Valves, with or without
Stage Two.
Security Cover
Following a spate of fuel thefts
at petrol filling storage tanks,
Berrys was approached to come
up with a suitable deterrent.
Berrys already supplies its unique
MONO chamber system to most
of the majors and it was a simple procedure to incorporate
a locking cover to the existing chambers.
Fill and Vent Cradles
Not using the ATLAS Fill Master
or Vent Master
We can, again
in our on–site fabrication
department, manufacture any
Fill and Vent Frame to suit your
site layout. They can be either
standalone or a combined unit
with the provision to install your
Stage 1b VR line. EROS Easy Riser can also be used on
conventional Vent systems.
Tank Lid Adaptor Plates
With more and more focus on the environment petrol
station operators are increasingly finding that they
have to replace old brick tank chambers with new
General Fabrications
In addition to the above
items our Fabrication team
manufactures many items
for the forecourt including
Vent Manifolds, Tank
Suction Internals, Bush
and Plug Extractor Kits,
Safety Platforms, Steel Tube
and Section Fabrications,
Protection Bollards and
Barriers. Our Welders and Fabricators have over 100
years combined experience. If it’s manufactured from Steel
– chances are Berrys can do it!!
1...,4,5,6,7,8,9,10,11,12,13 15,16,17,18,19,20
Powered by FlippingBook