Above Ground Systems
Install above ground fuel storage with specialised ATEX approved pump systems, transfering fuel from forecourt ground level through to above ground facilities. Bespoke Mono chambers can also be used, providing access to pipework and module equipment. As well as unique under pump sumps, required for above ground storage only.
Filling Pump
Designed to
transfer fuel from the filling point up into an above ground storage tank,
Berrys pumping system is certified with full ATEX approval. Typically, a set up
will consist of 4 filling points; stage one vapour recovery, Diesel fill,
Petrol fill, and a spare pump inlet. Behind the filling point is the optional
addition of Midas mis-fuel prevention. An intelligent valve that identifies the
fuel before it reaches the storage tank, preventing the case of a mis-fuel.
Key Features
- Includes Berrys VR adaptor
- Swing check valve for immediate shut off
- Tested rigorously for an extremely reliable above ground fuel transfer system
Above Ground Mono Chamber
With the
same reliable features you would expect from our well renowned mono chamber,
this is a system adapted slightly for above ground storage tanks. Each pipe
entry position arrives ready to fit, with pre-defined boot entry positions.
Allowing installers link all pipework to the pump rapidly. The above ground
Mono chamber includes an adjustable tank lid, providing easy access to the tank
top modules.
Key Features
- Direct weld to tank eliminating any risk involved with fuel/water liquid
- Boot entry points come pre fitted so installation is as simple as plug and play
- Chambers panels are welded and pressure tested to ensure reliability
Above Ground Pump Sump
A fabricated
pump frame that allows the pipes to enter from an above ground position. In
addition to this, the electrical wiring can also be fed into the inlets from
the side of the pump. So, the same communication from the pump to kiosk can be
kept despite not being underground. Each pump sump can be manufactured to suit
various models.
Key Features
- Direct weld to tank eliminating any risk involved with fuel/water liquid
- Boot entry points come pre fitted so installation is as simple as plug and play
- Chambers panels are welded and pressure tested to ensure reliability